|
|
Twin Coil Solar System
Our most popular solar hot water system. Works with any conventional boiler, replacing a standard hot water cylinder with our twin coil cylinder.
Comprises:
- Solar panel 2.4m x 1.2m (horizontal or vertical)
- Mains or PV solar power supply and fixing brackets
- Solar controller
- Pump unit with 3 litre drain back vessel
- 1200x450 twin coil hot water cylinder, 168 litres
- 30m high temperature pipe insulation [Also available with a mains pressure cylinder]
|
Vented twin coil solar system
Click on image for an enlargement
|
Combi Boiler Pre-Heat Solar System
Our favourite system for providing mains pressure hot water for pre-heating a combi boiler. No yearly servicing or specialist installation requirements. We recommend ATMOS condensing boilers for this purpose.
Comprises:
- Solar panel 2.4m x 1.2m (horizontal or vertical)
- Main or PV solar power supply and fixing brackets
- Solar controller
- Pump unit with 3 litre drain back vessel
- Thermal Store solar cylinder, 118 litres
- 30m high temperature pipe insulation
|
Mains Pressure Thermal Store Solar System
Click on image for an enlargement
|
Pre-Heat Cylinder Solar System
Our lowest-cost system and ideal where a conventional system is already in place and there is space to put another cylinder.
Comprises:
- Solar panel 2.4m x 1.2m (horizontal or vertical)
- Mains or PV solar power supply and fixing brackets
- Solar controller
- Pump unit with 3 litre drain back vessel
- 800x450 preheat cylinder, 100 litres
- 30m high temperature pipe insulation
|
Pre- Heat Cylinder Solar System
Click on image for an enlargement
|
Solar Power Supply
An optional extra is a PV power supply for the pump and controls, which replaces the mains electric power supply.
This comprises a photovoltaic (mains or PV) panel measuring 638mm x 278mm, which comes complete with brackets for roof mounting. When fitted, the solar system is no longer dependent on a mains power supply, has no fuel running costs of any kind and will work in remote applications and during power cuts.
Installation is easier and safer, as a power socket is no longer required to be fitted and no 240 volt mains wiring is required. Also running costs are zero, the whole system running just on the occasional top up of plain tap water!
|
PV for powering the system
pump and controls
|
|
|
|
|
|
|
|
|
|
|
